Seismological station OGFO composed of three accelerometrics sensors at Montbonnot drilling (Isère) - MédiHAL Accéder directement au contenu
Image (Photographie) Année : 2016

Seismological station OGFO composed of three accelerometrics sensors at Montbonnot drilling (Isère)

Station sismologique OGFO composée de trois capteurs accélérométriques aux forages de Montbonnot (Isère)

Résumé

The Montbonnot drilling site is a flagship site of the Permanent Accelerometer Network (RAP). This site is composed of three accelerometric sensors vertically distributed in the sedimentary basin of the Isère, with one sensor on the surface, another in a borehole at a depth of 40m and the third in the rock at the interface under sedimentary at a depth of 580m. This site is thus instrumented to allow the study of wave propagation and amplification in the Grenoble sedimentary basin. The image shows an overview of the instrumented site. On the one hand, there is the site's solar power system, which operates in total autonomy (solar generator, 4G data transmission). The photo also shows the two nozzles that protect the drill heads. One of them also contains the surface sensor. The infrastructure of this site was completely renovated in 2016 with funding from LABEX-OSUG2020. Previously, the surface instrumentation was installed in the building located in the background, whose state of ageing gave rise to fears for the durability of the equipment. This observation site is part of Résif, a national research infrastructure dedicated to observing and understanding the structure and dynamics of the Internal Earth. Résif is based on high-tech observation networks, composed of seismological, geodetic and gravimetric instruments deployed in a dense manner throughout France. The data collected make it possible to study with high spatial and temporal resolution the deformation of the ground, surface and deep structures, seismicity on a local and global scale and natural hazards, and more particularly seismic events, on French territory. Résif is part of the European (EPOS - European Plate Observing System) and global systems of instruments used to image the Earth's interior as a whole and to study many natural phenomena.
Le site du forage de Montbonnot est un site phare du Réseau Accélérométrique Permanent (RAP). Ce site est composé de trois capteurs accélérométriques répartis verticalement dans le bassin sédimentaire de l'Isère, avec un capteur en surface, un autre dans un forage à 40m de profondeur et le troisième dans le rocher à l'interface sous sédimentaire à 580m de profondeur. Ce site est ainsi instrumenté pour permettre l'étude de la propagation et de l'amplification des ondes dans le bassin sédimentaire Grenoblois. L'image présente une vision d'ensemble du site instrumenté. On distingue d'une part le système d'alimentation solaire du site, qui fonctionne en autonomie totale (générateur solaire, transmission des données en 4G). La photo montre également les deux buses qui protègent les têtes de forages. L'une d'elles renferme également le capteur de surface. L'infrastructure de ce site a été complètement rénovée en 2016 grâce à un financement du LABEX-OSUG2020. Précédemment l'instrumentation de surface était installée dans le bâtiment situé en arrière-plan, dont l’état de vieillissement laissait craindre pour la pérennité du matériel. Ce site d'observation est intégré à Résif, une infrastructure de recherche nationale dédiée à l’observation et la compréhension de la structure et de la dynamique Terre interne. Résif se base sur des réseaux d’observation de haut niveau technologique, composés d’instruments sismologiques, géodésiques et gravimétriques déployés de manière dense sur tout le territoire français. Les données recueillies permettent d’étudier avec une haute résolution spatio-temporelle la déformation du sol, les structures superficielles et profondes, la sismicité à l’échelle locale et globale et les aléas naturels, et plus particulièrement sismiques, sur le territoire français. Résif s’intègre aux dispositifs européens (EPOS - European Plate Observing System) et mondiaux d’instruments permettant d’imager l’intérieur de la Terre dans sa globalité et d’étudier de nombreux phénomènes naturels.

Dates et versions

medihal-01998065 , version 1 (29-01-2019)

Licence

Paternité

Identifiants

  • HAL Id : medihal-01998065 , version 1

Citer

Mickaël Langlais. Seismological station OGFO composed of three accelerometrics sensors at Montbonnot drilling (Isère). Photography. Montbonnot (38330), France. 2016. ⟨medihal-01998065⟩
88 Consultations
16 Téléchargements

Partager

Gmail Facebook X LinkedIn More