Test of the station OGDF during the Résif-CLB prospecting at Dieulefit (Drôme) - MédiHAL Accéder directement au contenu
Image (Photographie) Année : 2018

Test of the station OGDF during the Résif-CLB prospecting at Dieulefit (Drôme)

Test du site de la station OGDF durant la prospection Résif-CLB à Dieulefit (Drôme)

Résumé

This image shows the Nanometrics T120PA velocimetric sensor being installed during the exploration campaign of the OGDF site near Dieulefit in February 2018. The sensor installed for a period of three weeks to evaluate the quality of the site in terms of seismology is installed on the outcropping rock. This sensor will be protected by a thermal insulation cover visible on the image below right to limit the effects of thermal variations on the noise levels recorded by this sensor. At the end of this test campaign, the data were analyzed and integrated into the site proposal document for the Broadband Reactive-Construction (BRC) project. The site was subsequently validated by the technical committee and since then, the station has been installed in a sustainable manner (borehole infrastructure) and is now integrated into the RLBP-Résif, a research infrastructure dedicated to the observation and understanding of the internal Earth structure and dynamics. It is based on observation networks of high technological level, composed of seismological, geodetic and gravimetric instruments deployed in a dense way throughout the French territory. The data collected allow to study with a high spatio-temporal resolution the ground deformation, the superficial and deep structures, the seismicity at the local and global scale and the natural hazards, especially seismic, on the French territory. Résif integrates with European (EPOS - European plate observatory system) and worldwide instruments to image the interior of the Earth as a whole and to study numerous natural phenomena.
Cette image présente le capteur vélocimétrique T120PA de chez Nanometrics en cours d’installation lors de la campagne de prospection du site OGDF situé à proximité de Dieulefit en février 2018. Le capteur installé pour une durée de trois semaines afin d’évaluer la qualité du site en terme sismologique est installé sur le rocher affleurant. Ce capteur sera protégé par un couvercle d’isolation thermique visible sur l’image en contre-bas à droite afin de limiter les effets des variations thermiques sur les niveaux de bruits enregistrés par ce capteur. A l’issue de cette campagne de test, les données ont été analysées et intégrées au document de proposition de site pour le projet Résif-Construction large bande (Résif-CLB). Le site a été par la suite validé par le comité technique et depuis, la station a été installée de façon durable (infrastructure en forage) et est maintenant intégrée au RLBP-Résif, une infrastructure de recherche dédiée à l’observation et la compréhension de la structure et de la dynamique Terre interne. Il se base sur des réseaux d’observation de haut niveau technologique, composés d’instruments sismologiques, géodésiques et gravimétriques déployés de manière dense sur tout le territoire français. Les données recueillies permettent d’étudier avec une haute résolution spatio-temporelle la déformation du sol, les structures superficielles et profondes, la sismicité à l’échelle locale et globale et les aléas naturels, et plus particulièrement sismiques, sur le territoire français. Résif s’intègre aux dispositifs européens (EPOS - European plate observatory system) et mondiaux d’instruments permettant d’imager l’intérieur de la Terre dans sa globalité et d’étudier de nombreux phénomènes naturels.

Dates et versions

hal-02921300 , version 1 (25-08-2020)

Licence

Paternité

Identifiants

  • HAL Id : hal-02921300 , version 1

Citer

Benjamin Vial. Test of the station OGDF during the Résif-CLB prospecting at Dieulefit (Drôme). Photography. Dieulefit (26220), France. 2018. ⟨hal-02921300⟩
66 Consultations
11 Téléchargements

Partager

Gmail Facebook X LinkedIn More