LiDAR map showing the density of measurement points over the area where surface breaks were observed during the 5.2 Mlv post-earthquake mission near Montélimar on November 11, 2019 - MédiHAL Accéder directement au contenu
Image (Photographie) Année : 2019

LiDAR map showing the density of measurement points over the area where surface breaks were observed during the 5.2 Mlv post-earthquake mission near Montélimar on November 11, 2019

Carte LiDAR montrant la densité de points de mesure sur la zone où les ruptures de surface ont été observées lors de la mission post-sismique du séisme de 5.2 Mlv près de Montélimar le 11 novembre 2019

Laurence Audin
Maxime Rousseau
  • Fonction : Auteur

Résumé

On November 11, 2019 at 10:52 a 5.2 MLv earthquake occurred near Montélimar. A field mission to map the ground failure resulting from the earthquake was organized. It used instruments on the ground, but also in the air. This image shows the density map of measurement points over the area where surface breaks were observed on the ground. It was developed by acquisition of LIDAR airborne during the helicopter flight over the area. The axes are in meters. These measures will be able to complete the inventory of evidence of rupture on the ground, with a broader and more homogeneous framework (which makes it possible to abstract from the vegetation cover, particularly in this very wooded area) This mapping mission is part of a broad mobilization of the national scientific community, and in particular the Résif research infrastructure. This national research infrastructure is dedicated to the observation and understanding of the structure and dynamics of the Inner Earth. Résif is based on high-tech observation networks, composed of seismological, geodetic and gravimetric instruments deployed in a dense manner throughout France. The data collected make it possible to study with high spatial and temporal resolution the deformation of the ground, surface and deep structures, seismicity on a local and global scale and natural hazards, and more particularly seismic events, on French territory. Résif is integrated into European (EPOS - European Plate Observing System) and global systems of instruments for imaging the Earth's interior as a whole and studying many natural phenomena.
Le 11 novembre 2019 à 10h52 un séisme d'une magnitude 5,2 MLv se produit à proximité de Montélimar. Une mission de terrain visant à cartographier la rupture au sol résultant du séisme a été organisée. Elle a fait appel à des instruments au sol, mais également dans les airs. Cette image montre la carte de la densité de points de mesure sur la zone où les ruptures de surface ont été observées au sol. Elle a été élaborée par acquisition LIDAR aéroporté lors du survol de la zone en hélicoptère. Les axes sont en mètres. Ces mesures pourront compléter l’inventaire des évidences de rupture effectué au sol, avec un cadre plus large et plus homogène (qui permet de s’abstraire de la couverture végétale notamment dans cette zone très boisée) Cette mission de cartographie s’inscrit dans une large mobilisation de la communauté scientifique nationale, et notamment de l'infrastructure de recherche Résif. Cette infrastructure de recherche nationale est dédiée à l’observation et la compréhension de la structure et de la dynamique Terre interne. Résif se base sur des réseaux d’observation de haut niveau technologique, composés d’instruments sismologiques, géodésiques et gravimétriques déployés de manière dense sur tout le territoire français. Les données recueillies permettent d’étudier avec une haute résolution spatio-temporelle la déformation du sol, les structures superficielles et profondes, la sismicité à l’échelle locale et globale et les aléas naturels, et plus particulièrement sismiques, sur le territoire français. Résif s’intègre aux dispositifs européens (EPOS - European Plate Observing System) et mondiaux d’instruments permettant d’imager l’intérieur de la Terre dans sa globalité et d’étudier de nombreux phénomènes naturels.

Dates et versions

hal-02390591 , version 1 (03-12-2019)

Licence

Paternité

Identifiants

  • HAL Id : hal-02390591 , version 1

Citer

Laurence Audin, Maxime Rousseau. LiDAR map showing the density of measurement points over the area where surface breaks were observed during the 5.2 Mlv post-earthquake mission near Montélimar on November 11, 2019. Photography. Montélimar, France. 2019. ⟨hal-02390591⟩

Collections

IRD EPOS-FRANCE
74 Consultations
17 Téléchargements

Partager

Gmail Facebook X LinkedIn More